Electric Chain Hoists

Electric chain hoist GP (GPM250, GP250 – 1000, up to 2500 kg)
Reliable and long-lasting
3 year warranty
Chain safety factor minimum 8-times (1-fall in FEM, 2m, ISO, M5)
Protection class IP65 as standard
Easy to operate
60 % higher lifting capacity
Quiet running with 3-step drive and helical gearing
Polygonal connections
Customer specific
Three- or single-phase version
Direct control, special control, radio remote control, frequency inverter
Special versions such as synchronized electric chain hoist, low headroom version, corrosion resistant version, ATEX

Electric chain hoist GCH (GCH1600 – 2500, up to 5000 kg)
Made for industrial use: body and covers completely built in aluminum
Silent working due to helical gears
Highest safety with brake positioned after the slipping clutch
Proven DC spring brake
Equipped with gearead limit switch as a standard
Wide range of accessories and options

Corrosion Resistant Hoist (GPR Up to 1250 Kg)
Corrosion resistant electric chain hoist, For use in food, pharmaceutical or chemical industry, wastewater treatment plants, outdoor use
Housing cataphorese coated. Round, stainless steel chain. Suspension corrosion resistant
All parts in contact with the chain (wearing parts such as chain wheel, load hooks, screws) in corrosion resistant version
Protection class IP65
Special grease for food industry
Option: overpressure release valve
Option: manual or motorized trolley in corrosion resistant version

Explosion Proof (GP and GCH, up to 5000 Kg)
Electric chain hoist explosion proof ATEX version. Available in a dust- and gas proof execution
For zones 22 (D) and 2 (G)
Protection class IP65
Option: motorized trolley in ATEX version

Frequency controlled (GPFU and GCHFU, up to 5000 kg)
Electric chain hoist with frequency inverter. For applications with high switching frequency and shift operation
Lifting speed up to 14 m/min. With soft start for precise and gentle positioning of the load
Transportation without overshooting and exact positioning of the load in combination with frequency-controlled motorized trolley
Speeds and ramps for lifting and travelling programmable adjusted to the application
Protection class IP65
Option: motorized trolley with frequency inverter
Option: equipped with radio remote control

Handy chain model (GPH, up to 500 kg)
Handy chain model for quick and easy positioning of loads. Control of electric chain hoist and guidance of the load with one hand
Control unit with rocker switch for left- and right-handed operation. Hook end positions adjustable by geared limit switch
Perfect to combine with GISKB slewing or suspended crane
Option: handy kit for retrofitting of GIS standard electric chain hoist
Option: with frequency inverter
Option: customised devices for load handling

Handy telescope model (GPHT, up to 250 kg)
Handy telescope model for fast and accurate positioning of loads. Operation of electric chain hoist and simultaneous precise guidance of the load with one hand
Ideally suited for eccentric loads. Control unit with rocker switch for left- and right-handed operation
Hook end positions adjustable by geared limit switch. Perfect to combine with articulated slewing crane or GISKB suspended crane
Option: with frequency inverter
Option: customised devices for load handling
Option: with slack chain shutdown

Synchronised hoist (GPS, up to 2 x 2500 kg)
Synchronised electric chain hoist for transportation of large and bulky loads. Precise parallel run of two hooks without twisting the load.
2 electric chain hoists connected electrically and mechanically With temperature monitoring
Hook position individually adjustable by geared limit switch. Distance between load hooks 0.7-5.0 m
Perfect to combine with GISKB suspended crane or travelling crane
Option: with trolleys
Option: with frequency inverter
Option: customised devices for load handling

Synchronised hoist (GCHS, up to 2 x 1600 kg)
Synchronised electric chain hoist for transportation of large and bulky loads. Precise parallel run of two hooks without twisting the load.
2 electric chain hoists connected electrically and mechanically With temperature monitoring
Hook position individually adjustable by geared limit switch. Distance between load hooks 0.7-5.0 m
Perfect to combine with GISKB suspended crane or travelling crane
Option: with trolleys
Option: with frequency inverter
Option: customised devices for load handling

Low headroom version (GPK and GCHK, up to 4000 kg)
Synchronised electric chain hoist for transportation of large and bulky loads. Precise parallel run of two hooks without twisting the load.
2 electric chain hoists connected electrically and mechanically With temperature monitoring
Hook position individually adjustable by geared limit switch. Distance between load hooks 0.7-5.0 m
Perfect to combine with GISKB suspended crane or travelling crane
Option: with trolleys
Option: with frequency inverter
Option: customised devices for load handling

Wind power plants (GP, up to 1000 kg)
Electric chain hoist for wind turbines. Lifting speed up to 16 m/min. Lifting height up to 200 m. Temperature monitoring with shutdown function of the motor in case of overheating. Automatic switching from high to low lifting speed shortly before the stroke end by geared limit switch. External limit switches for hook end positions
Tempered special chain
Load hook with protective cover
Option: with manual or motorised trolley
Option: chain container

Manual chain hoist (GISHKZ, up to 3000 kg)
Lifting heights freely selectable
Safety brake holds the load in any position safely
Overload protection as a standard
Swiveling top and bottow hook