100t Gantry Cranes Utilized for Casting of Precast U Beam for Bridge Construction.

The contractors consider its more economical to cast the beams near the construction sites. This will reduce the down time and money spent in transportation. To keep the investment low, gantry crane fits the purpose. The gantry cranes can be dismantled and used for other projects. Crane Specification Capacity: 100t (50t+50t) Span: 24m Height of lift:10m Travel length:250m Air-conditioned operator cabin: to have [...]

September 3rd, 2020|

Ace Cranes used in one of the largest Aluminium Smelters

Design, Manufacture, Supply Install, testing and commission of : 10+10t - 4 Nos Potroom construction crane 20+20t - 4 Nos Potroom construction crane. 30t+30t - 2 Nos Potroom construction crane. 10+10t - 2 Nos PTM Maintenance shop construction crane. 6t hoist -1 Nos cathode Sealing Service Crane. Span: 24m Height of lift: 9.56m Cranes were used during the construction phase of the Potrooms handling [...]

June 9th, 2020|

Paper Mill in Abu Dhabi selects ABUS again – THE BEST IN TERMS OF QUALIITY

A strong reason for choosing ABUS as a supplier, was that they realized that ABUS cranes are the most reliable and service-friendly cranes in the market, according to their own maintenance staff. The paper mill machine supplier from Sweden selected ABUS as they have a very good experience working with ABUS cranes in their previous projects in the Middle East. Ace Cranes , authorized [...]

May 13th, 2020|

How Ace Group is coping up in the COVID-19 times

We feel it is important to mention that we continue to be ‘Open for Business’ at Ace Crane systems LLC. We want to let you know and reassure you that we are doing everything we can to continue to deliver our services and operate to the best of our ability during this difficult time. We are closely monitoring the advice given by the [...]

April 19th, 2020|

Big Start For 2020

We are delighted to inform that we started this year with manufacturing and installation of 2 Nos of 16t x 25m +10m cantilever 10m HOL Gantry cranes. These cranes are the back bone of a precast manufacturing facility to build 5000 new Villas in Saudi Arabia. In the picture above, you can see the Load testing was performed at the cantilever region as [...]

March 23rd, 2020|

Safeguard Your Facility From Risk Of Explosions

ITALKRANE S.R.L was born with the aim to design, produce and sell material lifting equipment of any size, capacity and type with the SPECIALITY been EXPLOSION PROOFING OF OUR EQUIPMENTS FOR ZONES 1 & 2. Established in 1962, Italkrane is continuing to rise on the international markets thanks to its versatility, flexibility and up-to-date technology, thus gradually gained its status as a leader [...]

March 10th, 2020|

Stay Committed…

There is a  thought behind each idea----- customers who are committed to their target always  plan to save time during machine breakdown. This is for one of world leading plastic packaging industry who requested for a crane in a very confined space to maintain their machinery. Ace cranes provided  customized solution: 2t  x 5m span under slung crane with 4m cantilever on both [...]

January 29th, 2020|

Goliath Crane for Ship Building Industry

Ace Crane Systems LLC  supplies Goliath Cranes suitable for ship building industry, which requires extensive capacities, spans and height of lifts. Two of such cranes installed in Abu Dhabi are shown above. There is limitation on the crane size for Ace Crane Systems. SKY IS THE LIMIT. Specification Giant crane of 50/10 x 22m span x 25m HOL 50/10 x 26m span x [...]

January 27th, 2020|


One of the smallest crane we would have manufactured till date but serves the purpose in the middle of the nowhere. Picture says it all. Its key feature is its mobility. It can be transported easily on standard trailer. Crane can travel outside the container for loading and offloading purpose. Up to 5 ton capacity with 2 meter span. Hydraulic [...]

December 22nd, 2019|

ABUS EOT and jib cranes at a pump manufacturer’s site in Sweden

New jib cranes and EOT cranes were used in addition to the reused cranes. A pillar jib crane of the VS type with a height of over 8 metres, a load capacity of 4 tonnes and a jib arm length of 5 metres was supplied among others. This jib crane features an electric wire rope hoist and was mounted in the underground car park. It serves the loading area on the level [...]

October 15th, 2019|

ABUS Overhead Cranes supplied and installed at Africa Steel and Tube in South Africa

Morris Cranes, a Division of Morris Material Handling SA (Pty) Ltd, a wholly owned South African company and the sub-Saharan agent of ABUS Kransysteme GmbH has supplied and installed lifting equipment at Africa Steel and Tube in Johannesburg, South Africa Africa Steel and Tube (Pty) Ltd is a recently established steel tube manufacturer specialising in precision drawn steel tubing (round, square, regular and tubing [...]

September 15th, 2019|

ABUS solve material flow for São José Industrial – a producer of agricultural machinery in Brazil

The sector of agricultural machinery and equipment is one of the fastest growing ones in Brazil. This industry continues to expand in direct contrast to the economic crisis which has been ongoing since 2015. Preliminary estimates of the Brazilian engineering federation (Abimaq) had the sustained growth of this industry at 8% for 2018. However, Mr Pedro Estevão de Oliveira, the president of the chamber [...]

August 15th, 2019|

Low headroom 7 ton capacity double girder crane with 37 meters span for a plastic pipe company

As a professional material handling solution supplier & among the experience in providing overhead crane material handling solutions for various industries, ACE CRANES has authority in providing overhead crane material handling source for plastic pipe manufacturing industry where we have provided various kinds of plastic pipe industries. Recently, we have just served a plastic pipe manufacturing company in Abu Dhabi, [...]

July 31st, 2019|
Go to Top